i.Natural Stone
Natural Stone
Travertine, marble and slate, laid with care for each stone's natural variation so the floor reads as one beautiful surface.
TravertineMarbleSlateFrom wide-format porcelain to hand-cut natural stone, every floor we install is built on a substrate prepared to last decades, not just to pass an inspection. Over 25 years of exceptional tile craftsmanship for Utah's most discerning homeowners and builders.
(801) 598-2226 · We call back within 24 hours
RKD Tile installs custom stone and tile floors for homeowners, builders and businesses across Park City and the Salt Lake County area. Every floor is planned around your space, your material and how you live on it.
Every floor we install is built on substrates prepared to last decades, not just to pass an inspection.
Whether it's a travertine great room, a marble entry, a large-format porcelain kitchen or a patterned inlay in a commercial lobby, the approach is the same: plan the layout before the first cut, prepare the base properly, and set every tile flat, true and fully supported. That attention to detail is why Utah homeowners, builders and businesses have trusted RKD Tile for more than 25 years.
Pattern work
Custom inlay
Tap a material to explore. We help you choose the right stone or tile for the room, the traffic and the look you want.
i.Natural Stone
Travertine, marble and slate, laid with care for each stone's natural variation so the floor reads as one beautiful surface.
TravertineMarbleSlate
ii.Large-Format Porcelain
Tiles up to 4′ × 4′ for a clean, near-seamless floor. Large tile demands a flat, true substrate, and that is where we start.
Up to 4′ × 4′Minimal groutLow maintenance
iii.Pattern & Inlay
Geometric layouts, borders and custom inlays planned on paper first, so every line meets exactly where it should.
GeometricBordersCustom inlays
iv.Mosaic & Detail
Intricate mosaics for backsplashes, showers and feature walls, set by hand with tight, consistent joints.
BacksplashesShowersFeature wallsCracked tile, hollow spots and lippage usually start below the surface. Before a single tile is set, we make sure what's underneath is ready to carry it for decades. Tap each layer to see what goes into a floor built to last.
Porcelain, ceramic or natural stone up to 4′ × 4′, laid out so cuts, grout lines and patterns land exactly where they should.
Every project is different. We recommend the right prep for your floor at your consultation.
Large-format tile gives a floor a calm, seamless look with fewer grout lines to clean. It also takes real skill to install: the bigger the tile, the flatter the floor underneath has to be. RKD Tile installs tiles up to 4′ × 4′. Pick a size below to see how it lays out across a 10′ × 12′ room.
This commercial lobby started as a bare slab still covered in old thinset and adhesive. We cleaned and prepared the substrate, then installed large-format porcelain tile in an offset pattern across the main lobby, display wall and elevator area. Drag the slider to see the difference.


Commercial lobby · Large-format porcelain tile, offset pattern
A few recent RKD Tile projects from around Park City and the Salt Lake Valley. Tap any photo to view it full size, or see more on our full gallery.
From custom backsplashes and intricate stone flooring to complete bathroom renovations, fireplaces and commercial installations, we deliver expert tile and natural stone craftsmanship tailored to every project. Whether you need a new tile install or a repair, we serve residential and commercial clients throughout Park City and the Salt Lake County area.

Complete bathroom and shower tile, from waterproofing to the final grout line.

Mosaics, patterns and statement walls for kitchens and bars.

Stone and tile surrounds that become the focal point of the room.

Restaurants, retail, lobbies and offices, built to handle heavy traffic.

Cracked, loose or failing tile corrected at the source, including other installers' work.
Long-term relationships, built one project at a time.RKD Tile · Park City & Salt Lake County
Many of our clients come to us after a bad past experience with another installer. We earn their confidence the same way every time: real reviews from local homeowners, clear communication from first call to final walkthrough, and certifications you can verify.
Over 25 years and 300+ documented projects. Rob Dean and his crew have worked with every kind of floor, substrate and stone, from mountain homes in Park City to commercial spaces in Salt Lake County. That experience shows in the details.
BBB A+ rated, licensed and insured, with work featured in Park City Area Showcase of Homes projects. Our reputation is built on long-term relationships with homeowners and builders who come back project after project.
We call back within 24 hours, show up when we say we will and keep your project on a clear timeline. You will always know what is happening next, and the job site is left clean at the end of every day.
No pressure and no surprises. Here's what working with RKD Tile looks like, from the first phone call to the finished floor.
Tell us about your floor, the space and the look you have in mind.
We talk through your project and set up a time to see it.
We assess the substrate, review materials and layout, and give you a clear plan.
Our crew preps, sets and finishes your floor, then leaves the space clean.

RKD Tile is owned and run by Robert "Rob" Dean. For more than 25 years, Rob has built the company on a simple idea: do the work right the first time, communicate clearly, and treat every home like your own.
Rob is personally involved in your project, from the first conversation about materials and layout to the final walkthrough. His crew are experienced tile setters who take the same care with prep, cuts and cleanup that Rob does. It's why so many clients become repeat customers, and why builders keep calling us back.
Homeowners mention the same things again and again: exceptional tile work, a crew that shows up when they say they will, clean job sites, and an owner who is patient, personable and easy to work with.
We focus on custom tile and stone floors in Park City and across Salt Lake County, for homeowners, builders and businesses. From mountain homes and ski properties in Summit County to new construction and remodels throughout the Salt Lake Valley, we know Utah homes and the conditions their floors have to stand up to.
Travertine, marble and slate bring warmth and character no manufactured product can match. We help you choose the right stone and finish for each room, then lay it out so the natural variation looks intentional and beautiful.
Porcelain tiles up to 4′ × 4′ create a clean, modern floor with minimal grout lines. Because large tile magnifies any unevenness, we flatten and prepare the substrate before installation so every tile sits flat and true.
Herringbone, geometric patterns, borders and custom inlays turn a floor into a design feature. We plan every pattern before cutting begins, so lines stay straight and transitions land exactly where they should.
If your current floor is cracked, hollow or uneven, we find out why. We correct the problem underneath, remove what's failing and install a new floor built to last, including fixing work left behind by other installers.
We install natural stone, porcelain and ceramic tile in sizes up to 4′ × 4′. Large-format tile needs a very flat, well-prepared substrate, which is why prep is a core part of every floor we install.
Most of what makes a floor last happens before the first tile is set. We take the time to prepare the substrate properly, plan the layout and set every tile with care, so the floor performs for decades rather than just passing inspection.
Yes. Many of our clients come to us after a bad past experience. We look at what went wrong, correct the underlying problem and install a floor that is built to last.
We focus on Park City and the Salt Lake County area, including Salt Lake City, Sandy, Draper, West Jordan and Taylorsville.
Call us at (801) 598-2226 or send the form. We call back within 24 hours to talk through your project and schedule a consultation.
We look at the space and the existing floor or substrate, talk through the materials and layout you have in mind, and answer your questions. Then we give you a clear plan and estimate for your project.
Sometimes. On some walls and backsplashes, new tile can be set over existing tile when it's solid and well bonded. For floors, we check the condition of what's there first and recommend the approach that will last.
Yes. Many of our long-term relationships are with builders, and our work has been featured in Park City Area Showcase of Homes projects. We're comfortable working from plans, specs and design selections.
Yes. Along with homeowners, we install tile for builders and businesses, including restaurants, retail spaces, lobbies and offices.
Tell us about your floor and we'll call you back within 24 hours. No pressure, just an honest conversation about your project.
(801) 598-2226